4/30/2023 0 Comments Brother printer test print![]() ![]() Release GO, all the LEDs will turn off.Hold the button until all the LEDs light up and the Ready LED light turns off. Hold the GO button while you turn the printer on.Press GO three (3) times within two (2) seconds.Turn the printer on and wait until it is in Ready mode. ![]() Press GO once more, and the printer will print a test page.Hold the button until the Toner, Drum and Error LEDs light up. ![]() Youtube Video: Change Toner Cartridge Brother HL-2240 - Print Test Page Youtube Video: Reset Drum Brother HL-2240 - Change Toner Cartridge Release the “GO” button and close the front cover. Simply open the front cover, and hold the “GO” button until all four LED’s are lit. This will turn off the drum warning light on the printer. The Error LED should now be flashing, close the front cover.Īfter changing a DR420 / DR2200 drum unit in a Brother HL-2240, the printer’s page count needs to be reset.TN450 / TN2220 cartridge - Press the Go button seven (7) times.TN420 / TN2210 cartridge - Press the Go button six (6) times, or.Using control panel button: Make sure that the front cover is closed and the power cord is plugged in. ![]() The Toner, Drum, and Error LEDs will turn on. Print a Test page Print the test page from the control panel of the printer or the printer driver as follows.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |